Kanguru BR-DUPE-S1 Guide de l'utilisateur télécharger pdf (Page 70)

After 2 or 3 seconds of processing time, the Copy Progress screen will appear.

Preparing...

Please Wait

6. When the number of discs detected matches the number

of blank discs you inserted, press the ENT button. You

will see the Processing screen.

Note: It is normal to see the progress indicator stay at 0-10%

and 100% for approximately 30 seconds to one minute for

duplication. That is caused by the initializing and finalizing

stages.

Copying... 4012MB

0 10% 401MB

7. Once the Copy process has been completed, the Writer trays will automatically eject and you will

see the Print Preparation screen.

8. Remove the discs and then reinsert the discs into the

Writer drives with the label-side facing down this time.

Note: Only insert LightScribe compatible discs into the

Writer drives.

Preparing... H

Please Insert Label Disc

9. After you’ve reloaded the drives with discs, close the trays and allow 5 - 10 seconds for the system

to detect them. Once all the discs have been recognized, you will see the Confirmation screen.

Note: The “7” indicates that there are seven discs recognized

by the Writers. The actual quantity may be different

depending on the number of discs you have inserted.

10. When the number of discs detected matches the number

of blank discs you inserted, press the ENT button. You

will see the Processing screen.

Preparing...

Please Wait

Preparing :

7 Disc Detected : Go?

After 2 or 3 seconds of processing time, the Print Progress screen will appear.

Printing... H

LSlabel 0 45%

Copy & Print LightScribe Label

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 88 89

Pas de commentaire

Kanguru BR-DUPE-S1 Guide de l'utilisateur Page 70