Kanguru Optical Duplicator Manuel d'utilisateur

Kanguru Optical DuplicatorUser GuideModels: U2-DVDDUPE-S, DVDDUPE-SHD, NET-DVDDUPE-S and BR-DUPECopyright 2012, All Rights Reserved.

10Chapter 3. Using Your Kanguru DuplicatorThis chapter will guide you through operating the different functions available on the Kanguru Duplicator.

113.2 General Operations This section will go over some basic operations that can be applied to more than one function.3.2.1 Entering Names and Numb

123.2.3 Shortcut ButtonsThere are 4 shortcut buttons (COPY, TEST, SPEED, SOURCE) that can be found on the LCD Panel (see section “2.5 LCD Display” on

133.3 The Main Menu Turn on the Kanguru Duplicator by pressing the Power On button. Wait for a moment to allow the system to boot up. Once the system

143.4 CopyThe Copy function will guide you through making CD/DVD/BD copies. 3.4.1 Making disc to disc copiesThe Copy process will copy your master d

15Preparing :7 Discs Detected : Go?Note: The “7” indicates that there are seven discs recognized by the Writers. The actual quantity may be differen

163.4.2 Making copies from an existing hard drive partition (hard drive models only)Using the hard drive as the master copy source is the best way to

174. Insert discs into the drives. After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detect them.

183.5 CompareThe Compare function will perform a bit-by-bit comparison between your master disc (or master image on the hard drive) and all the copi

19 After 2 to 5 seconds of processing time, the Compare Progress screen will appear.Note: It is normal to see the progress indicator stay at 0-10% and

2Notices and InformationPlease be aware of the following points before using your Kanguru Duplicator Copyright© 2012, Kanguru Solutions. All rights re

203.6 Copy & CompareThis Copy & Compare function combines the Copy function (see section “3.4 Copy” on page 14) and the Compare function (see

21 After 2 to 5 seconds of processing time, the Copy Progress screen will appear.Note: It is normal to see the progress indicator stay at 0-10% and 10

223.7 TestThe Test function will perform a simulation of the copy process. During this simulation process the Duplicator will test that the master so

23Preparing :7 Discs Detected : Go?Preparing...Please WaitNote: The “7” indicates that there are seven discs recognized by the Writers. The actual

243.8 Test & CopyThe Test & Copy function combines the Test function (see section “3.7 Test” on page 22) and the Copy function (see section “

25 After 2 to 5 seconds of processing time, the Test Progress screen will appear.Testing... 4012MB 0 10% 401MBNote: It is norma

263.9 Mix Audio TracksThe Mix Audio Tracks function will guide you through creating a mixed audio CD that contains various tracks from different audi

274. Press the UP or DOWN button to navigate through each track on the audio CD. Press the ENT button to select the track you want to include on your

283.9.2 Mixing Through the Hard Drive (hard drive models only)By mixing an audio CD through the hard drive, all the tracks you select from the audio

29Total: 6 Trk 26m : 17sAre you done?5. Once you have finished selecting the tracks for this Audio CD, press the UP or DOWN button until you see

3Table of ContentsTable of ContentsChapter 1. Introduction ...

303.10 Select SourceThis Select Source function will allow you to select which disc drive (or hard drive if you purchased a hard drive model) will be

313.11 Erase The Erase function allows you to erase RW media. Once erased, the RW disc can be used again as blank media.You have two options for eras

327. Once the Erase process has been completed, you will see the following screen.Pass 7 Fail 0 ( 7)Waiting for RW Discs• PASS 7 - num

333.12 Job CounterThe Job Counter setting allows you to configure whether or not the system will allow you to set a job counter for each job (for mor

343.13 SetupThe Setup Menu contains settings that will allow you to modify how the Kanguru Duplicator operates. The original settings are already con

353.13.1 Select Burn SpeedThe Select Burn Speed setting allows you to adjust the duplication speed for various duplication job types. The Burn Speed

363.13.2 Duplication ModeThe Duplication Mode setting is for Kanguru Duplicator systems with a hard drive installed. If you purchased a Kanguru Dupli

373.13.3 LanguageThe Language setting allows you select which language your system displays. The available languages are: English, Spanish, Japanese,

383.13.5 CD Writing ModeThe CD Writing Mode setting allows you to select the CD writing method. The default setting is Disc at Once. There are two CD

393.13.6 Max Audio, VCD & CDG SpeedThe Max Audio, VCD & CDG Speed setting allows you to adjust the maximum duplication speed for Audio and Vi

4Table of Contents3.13.16 System Info ...453.13.17 Device Info ...

40Startup Menu Item / DVD+R Compatibility Mode3.13.8 Startup Menu ItemThe Startup Menu Item setting allows you to choose which menu you would like to

413.13.10 ISRCThe ISRC setting allows you to turn the ISRC function On or Off. Turning On ISRC allows the system to copy the ISRC information from an

423.13.12 OverburnOverburning is the process of recording data past the normal size limit. Many disc manufacturers extend the recordable area on a di

433.13.14 Advanced SetupThe Advanced Setup menu contains advanced settings that allow you to view and modify how the Kanguru Duplicator operates. The

443.13.14.1 Disc InfoThe Disc Info function allows you to view and identify the information encoded within your media. The Disc Info function provide

453.13.14.2 System InfoThe System Info function allows you to view information pertaining to your Kanguru Duplicator system. This information is usef

463.13.14.4 Load DefaultsThe Load Defaults function will allow you to reset all of the system’s settings back to the original, factory default settin

473.13.14.5 Bootup PasswordA Bootup Password can be created in order to prevent unauthorized users from operating the Duplicator. The Bootup Password

48Changing the Bootup PasswordAdvanced Setup5. Bootup PasswordBootup Password2. Change PasswordPassword Not Exist!Press ENT to ContinueChang

493.13.14.6 System Counter (hard drive models only)The System Counter function keeps a record of the number of Copy operations were performed, how ma

5Introduction / Package ContentsChapter 1. IntroductionThank you for purchasing the Kanguru Optical Duplicator from Kanguru Solutions. We are proud o

503.14 Auto CopyThis Auto Copy function allows the system to operate the disc-to-disc copy function without any user inputs for ease of operation. No

513.15 USB/External ConnectionThe USB/External Connection setting allows you to turn the USB port (or Ethernet port on Network models) on the back of

52Hard Drive Setup3.16 Hard Drive Setup (hard drive models only)If you purchased a Kanguru Duplicator with a hard drive, the Hard Drive Setup menu wi

533.16.1 Select PartitionThe Select Partition setting allows you to select a partition/image to be used as the default partition.Choose Partition[NE

54Load Partition3.16.2 Load PartitionThe Load Partition function will guide you through loading an image of a Master disc into one of the hard drive

553.16.3 Rename PartitionThe Rename Partition function allows you to rename an existing partition/image on the hard drive. Hard Drive Setup3. Renam

563.16.4 Delete PartitionThe Delete Partition function allows you to delete an existing image/partition on the hard drive.Hard Drive Setup4. Delete

573.16.5 Partition InfoThe Partition Info function allows you to view additional information for all existing partitions/images stored on the hard dr

58Format Hard Drive3.16.6 Format Hard DriveThe Format Hard Drive function allows you to re-format the internal hard drive. WARNING! During the format

59Chapter 4. Warranty and Tech SupportWarranty This product carries a 1 year* limited warranty on the power supply, controller, and all internal comp

6Chapter 2. Getting to Know Your Kanguru DuplicatorThis chapter will get you acquainted with your Kanguru Duplicator’s hardware and user interface. P

60Chapter 5. TroubleshootingNo display on the LCD or the unit does not operate when the power is on.Check that the power cable is securely connected

61Do I need to upgrade my system’s firmware?Unless your Duplicator is unstable, we strongly suggest not upgrading your system’s firmware. Do not attem

62Chapter 6. Error CodesThe following tables provide a description of the error codes and the recommend solution:Error CodeError Message Description

63Error CodeError Message Description & Recommended Solutions205Targets Not Blank!Description: The target (blank) discs are not detected and ident

64Error CodeError Message Description & Recommended Solutions209Master Disc is CSS Protected!Description: The master disc is copy-protected.Possib

65Error CodeError Message Description & Recommended Solutions231 Redundant NameDescription: The image name entered has already been used in the sy

66Error CodeError Message Description & Recommended Solutions251 Copy Audio ErrorDescription: An error occurred during the mixing process of your

67Chapter 7. RMA ProcedureAll Duplicators being serviced MUST BE PACKED IN THE ORIGINAL PACKAGING. If you do not have your original packaging, you ca

68Appendix A: Hidden Advanced Setup MenuThe following functions were developed primarily to be used for quality control, support, troubleshooting and

697. Speed Mode - A Writer drive’s default burning strategy is often designed for a single drive environment, which is not always suitable for a mult

72.3 System Overview Front Back HDD Note: 1 to 11 model shown with HDDFront1. Optical Disc Writers (Referred to as

70Appendix B: Kanguru Media Manager for Windows (Hard Drive models only)The Kanguru Media Manager needs to be installed in order for your computer to

71Using Kanguru Media MangerAfter you have successfully installed the Kanguru Media Manager onto your computer, you can now copy or save DVD image fil

72Appendix C: Copy Connect for Mac (Hard Drive models only)Like the Kanguru Media Manager, the CopyConnect software needs to be installed on your Mac

734. Open the MacFUSE (Tuxera) folder and then double-click on MacFUSE.pkg. Follow the installer instructions to install MacFUSE. Note: You may see t

745. Once MacFUSE has been installed, go back to the root directory and open the fuse-ext2 folder. Double-click on fuse-ext2.pkg and follow the inst

75Using CopyConnectAfter you have successfully installed the CopyConnect applications onto your Mac, you can now copy or save DVD image files to the K

766. Once you have successfully established a connection with the Duplicator’s internal hard drive, browse and select the .dmg or .iso disc image fil

779. When the transfer has completed, you will see the image file available in the right window. Note: If you don’t see the image file in the right w

78Appendix D: Duplicator Network Center (Network models only)The Kanguru Duplicator Network Center software needs to be installed on a PC in order to

79Using the Duplicator Network Center SoftwareOnce your Duplicator has been setup and connected to your LAN, you can begin using the Duplicator Networ

82.4 LCD Panel ENTESC DUPLICATORCOPY TEST SPEEDSOURCE : Up (Menu/Option Scroll Up) : Down (Menu/Option Scroll Down) : Enter, Forward, OK,

80TroubleshootingSymptom Problem SolutionThe Duplicator Network Center Software won’t detect the Network Duplicator.The Duplicator’s Network Module is

Legal terms and conditions available at www.kanguru.com. Please review and agree before use. Thank you.Kanguru Solutions 1360 Main StreetMillis, MA 02

92.5 LCD DisplayThe LCD display allows you to easily navigate and operate the Kanguru Duplicator. After the Kanguru Duplicator boots up, you will see