Kanguru BR-DUPE-S1 Guide de l'utilisateur

Kanguru 1, 2, 3, 5, 7 & 11 Target DuplicatorsUser GuideCopyright 2010, All Rights Reserved.

10Chapter 3: Using Your Kanguru DuplicatorThis chapter will guide you through operating the different functions available on the Kanguru Duplicator. 3

11 This section will go over some basic operations that can be applied to more than one function.3.2.1 Entering Names and NumbersSome functions will r

12There are 4 shortcut buttons (COPY, TEST, SPEED, SOURCE) that can be found on the LCD Panel (see section 2.5 LCD Display, p.9). These shortcut butto

133.3 The Main Menu Turn on the Kanguru Duplicator by pressing the Power On button. Wait for a moment to allow the system to boot up. Once the system

143.4 CopyThe Copy function will guide you through making CD/DVD/BD copies. 3.4.1 Making disc to disc copiesThe Copy process will copy your master dis

154. When the number of discs detected matches the number of blank discs you inserted, press the ENT button. You will see the Processing screen. Prep

163.4.2 Making copies from an existing hard drive partition (hard drive models only)Using the hard drive as the master copy source is the best way to

17After you’ve loaded the drives with discs, close the trays and allow 5 - 10 seconds for the system to detect them. If either of the preparation scre

183.5 CompareThe Compare function will perform a bit-by-bit comparison between your master disc (or master image on the hard drive) and all the copie

19 After 2 to 5 seconds of processing time, the Compare Progress screen will appear.Note: It is normal to see the progress indicator stay at 0-10% and

2Notices and InformationNotices and InformationPlease be aware of the following points before using your Kanguru Duplicator Copyright© 2010, Kanguru S

203.6 Copy & CompareThis Copy & Compare function combines the Copy function (see section 3.4 Copy, p.14) and the Compare function (see section

21 After 2 to 5 seconds of processing time, the Copy Progress screen will appear.Note: It is normal to see the progress indicator stay at 0-10% and 10

223.7 TestThe Test function will perform a simulation of the copy process. During this simulation process the Duplicator will test that the ma

23After 2 to 5 seconds of processing time, the Test Progress screen will appear.Testing... 4012MB 0 10% 401MBNote: It is normal

243.8 Test & CopyThe Test & Copy function combines the Test function (see section 3.7 Test, p.22) and the Copy function (see section 3.4 Copy,

25 After 2 to 5 seconds of processing time, the Test Progress screen will appear.Testing... 4012MB 0 10% 401MBNote: It is norma

263.9 Mix Audio TracksThe Mix Audio Tracks function will guide you through creating a mixed audio CD that contains various tracks from different audio

274. Press the UP or DOWN button to navigate through each track on the audio CD. Press the ENT button to select the track you want to include on your

283.9.2 Mixing Through the Hard Drive (hard drive models only)By mixing an audio CD through the hard drive, all the tracks you select from the audi

29Total: 6 Trk 26m : 17sAre you done?5. Once you have finished selecting the tracks for this Audio CD, press the UP or DOWN button until you see

3TABLE OF CONTENTSTable of ContentsNotices and Information ...

303.10 Select SourceThis Select Source function will allow you to select which disc drive (or hard drive if you purchased a hard drive model) will be

313.11 Erase The Erase function allows you to erase RW media. Once erased, the RW disc can be used again as blank media.You have two options for erasi

327. Once the Erase process has been completed, you will see the following screen.Pass 7 Fail 0 ( 7)Waiting for RW Discs• PASS 7 - num

333.12 Job CounterThe Job Counter setting allows you to configure whether or not the system will allow you to set a job counter for each job (for more

343.13 SetupThe Setup Menu contains settings that will allow you to modify how the Kanguru Duplicator operates. The original settings are already conf

353.13.1 Select Burn SpeedThe Select Burn Speed setting allows you to adjust the duplication speed for various duplication job types. The Burn Speed i

363.13.2 Duplication ModeThe Duplication Mode setting is for Kanguru Duplicator systems with a hard drive installed. If you purchased a Kangur

373.13.3 LanguageThe Language setting allows you select which language your system displays. The available languages are: English, Spanish, Japanese,

383.13.5 CD Writing ModeThe CD Writing Mode setting allows you to select the CD writing method. The default setting is Disc at Once. There are two CD

393.13.7 Button SoundThe Button Sound setting allows you to choose whether or not you hear an audible beep signal when a button is pressed or when a t

4Table of Contents3.13.14 Advanced Setup ...

403.13.8 Startup Menu ItemThe Startup Menu Item setting allows you to choose which menu you would like to see first when you turn on the system. You c

413.13.10 ISRCThe ISRC setting allows you to turn the ISRC function On or Off. Turning On ISRC allows the system to copy the ISRC information from an

423.13.12 OverburnOverburning is the process of recording data past the normal size limit. Many disc manufacturers extend the recordable area on a dis

433.13.14 Advanced SetupThe Advanced Setup menu contains advanced settings that allow you to view and modify how the Kanguru Duplicator operates. The

443.13.14.1 Disc InfoThe Disc Info function allows you to view and identify the information encoded within your media. The Disc Info function provides

453.13.14.2 System InfoThe System Info function allows you to view information pertaining to your Kanguru Duplicator system. This information is usefu

463.13.14.4 Load DefaultsThe Load Defaults function will allow you to reset all of the system’s settings back to the original, factory default setting

473.13.14.5 Bootup PasswordA Bootup Password can be created in order to prevent unauthorized users from operating the Duplicator. The Bootup Password

48Changing the Bootup PasswordAdvanced Setup5. Bootup PasswordBootup Password2. Change PasswordPassword Not Exist!Press ENT to ContinueChang

493.13.14.6 System Counter (hard drive models only)The System Counter function keeps a record of the number of Copy operations were performed, how man

5Chapter 1: IntroductionThank you for purchasing the Kanguru Duplicator from Kanguru Solutions. We are proud of the quality and reliability of our Dup

503.13.15 Print Setup (LightScribe models only)If you purchased a Kanguru Duplicator with LightScribe functionality, the Print Setup menu will allow y

513.13.15.1 Load Label (LightScribe models with hard drive only)The Load Label function will allow you to load a LightScribe Label file (.lsi

523.13.15.2 Rename Label (LightScribe models with hard drive only)The Rename Label function will allow you to rename an existing LightScribe Label loa

533.13.15.3 Delete Label (LightScribe models with hard drive only)The Delete Label function will allow you to delete an existing LightScribe Label sav

543.13.15.4 Print Surface InfoThe Print Surface Info function will allow you reveal the ID code of the LightScribe media’s label surface and the ID co

553.13.15.5 Label Info The Label Info function will display the media code associated with a LightScribe Label (.lsi) file. The media code specifies w

563.14 Auto CopyThis Auto Copy function allows the system to operate the disc-to-disc copy function without any user inputs for ease of operation. Not

573.15 USB ConnectionThe USB Connection setting allows you to turn the USB port on the back of the Kanguru Duplicator On or Off. When turned On, the s

583.16 Hard Drive Setup (hard drive models only)If you purchased a Kanguru Duplicator with a hard drive, the Hard Drive Setup menu will allow you to m

593.16.1 Select PartitionThe Select Partition setting allows you to select a partition/image to be used as the default partition.Choose Partition[NEW

6Getting to Know Your Kanguru DuplicatorChapter 2: Getting to Know Your Kanguru DuplicatorThis chapter will get you acquainted with your Kanguru Dupli

603.16.2 Load PartitionThe Load Partition function will guide you through loading an image of a Master disc into one of the hard drive partitions. Loa

613.16.3 Rename PartitionThe Rename Partition function allows you to rename an existing partition/image on the hard drive. Hard Drive Setup3. Rename

623.16.4 Delete PartitionThe Delete Partition function allows you to delete an existing image/partition on the hard drive.Hard Drive Setup4. Delete

633.16.5 Partition InfoThe Partition Info function allows you to view additional information for all existing partitions/images stored on the hard dri

643.16.6 Format Hard DriveThe Format Hard Drive function allows you to re-format the internal hard drive. WARNING! During the formatting process, all

653.17 Print LightScribe Label (LightScribe models only)The Print LightScribe Label function will guide you through printing a label using your

667. Once the Print process has been completed, you will see the following screen.Pass 7 Fail 0 ( 7)Waiting for Blanks• PASS 7 - number

673.17.2 Printing LightScribe Labels from the hard drive (LightScribe models with hard drive only)Before you can print LightScribe labels from the har

68The successfully printed discs will be ejected. Remove the successfully printed discs, refill the trays with printable media and press the ENT butto

693.18 Copy & Print LightScribe Label (LightScribe models with hard drives only)The Copy and Print LightScribe Label function combines the Copy (s

7System Overview2.3 System Overview Front Back HDD Note: 1 to 11 model shown with HDDFront1. Optical Disc Writ

70 After 2 or 3 seconds of processing time, the Copy Progress screen will appear.Preparing...Please Wait6. When the number of discs detected matches

7111. Once the Print process has been completed, you will see the following screen.Pass 7 Fail 0 ( 7)Waiting for Blanks• PASS 7 - num

72Chapter 5: TroubleshootingNo display on the LCD or the unit does not operate when the power is on.Check that the power cable is securely connected a

73Do I need to upgrade my system’s firmware?Unless your Duplicator is unstable, we strongly suggest not upgrading your system’s firmware. Do n

74Chapter 6: Error CodesThe following tables provide a description of the error codes and the recommend solution:Error CodeError Message Description &

75Error CodeError Message Description & Recommended Solutions205Targets Not Blank!Description: The target (blank) discs are not detected and ident

76Error CodeError Message Description & Recommended Solutions209Master Disc is CSS Protected!Description: The master disc is copy-protected.Possib

77Error CodeError Message Description & Recommended Solutions231 Redundant NameDescription: The image name entered has already been used in the sy

78Error CodeError Message Description & Recommended Solutions251 Copy Audio ErrorDescription: An error occurred during the mixing process of your

79Appendix A: Advanced Setup MenuThe following functions were developed primarily to be used for quality control, support, troubleshooting and furthe

82.4 LCD Panel : Up (Menu/Option Scroll Up) : Down (Menu/Option Scroll Down) : Enter, Forward, OK, Execute : Escape, Back, Cancel : Copy

807. Speed Mode - A Writer drive’s default burning strategy is often designed for a single drive environment, which is not always suit

81Appendix B: LightScribe Software (LightScribe models only)The LightScribe software included with your Kanguru Duplicator will allow you t

82Designing a LightScribe Label CD Using LightScribe Template LabelerThe instructions covered in this section will help you design LightScribe labels

833. Insert Text and/or Pictures. Depending on the template chosen, you may have the option to modify text boxes or pictures.a. To insert a picture,

845. If you are satisfied with the preview, click on the Print button to begin generating the LightScribe Label file (.lsi files).6. Enter a name fo

85Appendix C: Kanguru Media Manager (Hard drive models only)The Kanguru Media Manager needs to be installed in order for you to access your Kanguru Du

86Using Kanguru Media MangerAfter you have successfully installed the Kanguru Media Manager onto your computer, you can now copy or save DVD image fil

87Warranty Warranty This product carries a 1 year* limited warranty on the power supply, controller, and all internal components. The warranty does no

88RMA ProcedureAll Duplicators being serviced MUST BE PACKED IN THE ORIGINAL PACKAGING. If you do not have your original packaging, you can purchase r

Legal terms and conditions available at www.kanguru.com. Please review and agree before use. Thank you.Kanguru Solutions 1360 Main StreetMillis, MA 02

92.5 LCD DisplayThe LCD display allows you to easily navigate and operate the Kanguru Duplicator. After the Kanguru Duplicator boots up, you will see